Model | FW-PS Series | |||
---|---|---|---|---|
FW-PS-50A | FW-PS-65A | FW-PS-75A | ||
Raw Material | LLDPE | |||
Film Thickness | mm | 0.008-0.1 | 0.008-0.1 | 0.01-0.1 |
Film Width(max.) | mm | 200-750 | 600-1150 | 900-1600 |
Extruding Output | kg/hr | 15-50 | 28-80 | 50-120 |
Whole Power Required | kw | 40 | 50 | 70 |
Overall Dimension | cm | 450 x 220 x 400 | 480 x 260 x 450 | 680 x 320 x 600 |
Net Weight | kg | 3200 | 4200 | 6500 |
Extruder | Low Base Type | |||
Screw Diameter | mm | Ø50 | Ø65 | Ø75 |
Screw Ratio | l/d | 30:1 | 30:1 | 30:1 |
Driving V.S. Motor | hp | 30 | 50 | 75 |
Heating Power | kw | 10 | 15 | 20 |
Screw Speed | rpm | 0-120 | 0-110 | 0-110 |
Cooling Blower | pcs | Ø3" x 2pcs | Ø3" x 3pcs | Ø3" x 4pcs |
Temp. Controller | zone | 6 | 7 | 8 |
Die | Spiral Type | |||
Die Diameter | mm | 250 | 400 | 600 |
Heating Power | kw | 6.1 | 7.2 | 12.6 |
Rotating Air Ring | set | 1 | 1 | 1 |
Chilled Air Device | set | 1 | 1 | 1 |
Rotating Die Device | set | 1 | 1 | 1 |
Take-Up Unit | Motor Type | |||
Take-Up D.C. Motor | hp | 1 | 1 | 2 |
Take-Up Roller Width | mm | 800 | 1200 | 1800 |
Take-Up Height | rpm | 4200 | 4500 | 6000 |
Take-Up Speed | rpm | 10-120 | 10-120 | 10-120 |
Winder | Surface Type / Two Stations | |||
Winding Roller | pc | 870mm x 2pcs | 1270mm x 2pcs | 1870mm x 2pcs |
Winding DC/TM Motor | 1hp x 2pcs | 1hp x 2pcs | 1hp x 2pcs | |
Wastage Winder | 1 Set (Torque Motor 10 kg/cm) |