| Model | HL Series | ||||||
|---|---|---|---|---|---|---|---|
| HL-35S | HL-45S | HL-50S | HL-55S | HL-65S | HL-75S | ||
| Raw Material | HDPE / LDPE / LLDPE | ||||||
| Film Thickness | mm | 0.008-0.2 | 0.008-0.2 | 0.008-0.2 | 0.008-0.2 | 0.008-0.2 | 0.008-0.2 |
| Film Width | mm | 100-550 | 150-700 | 200-750 | 300-950 | 400-1150 | 500-1450 |
| Extruding Output | kg/hr | 10-30 | 15-60 | 15-75 | 20-90 | 25-120 | 30-140 |
| Whole Power Required | kw | 28 | 42 | 45 | 48 | 60 | 80 |
| Overall Dimension | cm | 400 x 180 x 360 | 420 x 200 x 400 | 450 x 210 x 400 | 470 x 220 x 420 | 480 x 240 x 480 | 500 x 260 x 500 |
| Net Weight | kg | 2500 | 2800 | 3000 | 3200 | 4000 | 5000 |
| Extruder | Low Base Type | ||||||
| Screw Diameter | mm | 35 | 45 | 50 | 55 | 65 | 75 |
| Screw Ratio | l/d | 30:1 | 30:1 | 30:1 | 30:1 | 30:1 | 30:1 |
| Driving V.S. Motor | hp | 20 | 25 | 30 | 40 | 50 | 75 |
| Heating Power | kw | 7 | 8.5 | 10 | 12 | 14 | 18 |
| Screw Speed | rpm | 0-140 | 0-140 | 0-140 | 0-140 | 0-120 | 0-120 |
| Cooling Blower | pcs | Ø2 1/2" x 1 | Ø2 1/2" x 2 | Ø3" x 2 | Ø3" x 2 | Ø3" x 3 | Ø3" x 3 |
| Temp. Controller | zone | 4 | 5 | 5 | 5 | 7 | 7 |
| Die | Spiral Type | ||||||
| Die Diameter | mm | HL 40&65 L120 | HL 65&85 L150 | HL 65&100 L150 | HL 90&120 L200 | HL 100&150 L250 | HL 120&200 L300 |
| Heating Power | kw | 2.8 or 4 | 3 or 4 | 3 or 4 | 3 or 4.2 | 3.5 or 5 | 3.5 or 6 |
| Blower | hp | 3 | 5 | 5 | 5 | 5 | 7 1/2 |
| Air Ring | set | 1 | 1 | 1 | 1 | 1 | 1 |
| Take-Up Unit | Motor Type | ||||||
| Take-Up D.C. Motor | hp | 1/2 | 1 | 1 | 1 | 1 | 2 |
| Take-Up Roller Width | mm | 600 | 750 | 800 | 1000 | 1200 | 1500 |
| Takep-Up Height | mm | 4000 | 4200 | 4200 | 4500 | 5000 | 5500 |
| Take-Up Speed | rpm | 0-140 | 0-140 | 0-140 | 0-140 | 0-140 | 0-140 |
| Winder | Surface Type / One or Two Station (Optional) | ||||||
| Winding Roller | pc | 1 pc or 2 pcs (Optional) | 1 pc or 2 pcs (Optional) | 1 pc or 2 pcs (Optional) | 1 pc or 2 pcs (Optional) | 1 pc or 2 pcs (Optional) | 1 pc or 2 pcs (Optional) |
| Torque Motor | kg/cm | 20x1 or 2pcs | 20x1 or 2pcs | 20x1 or 2pcs | 20x1 or 2pcs | 30x1 or 2pcs | 40x1 or 2pcs |
| Winding Width(max.) | mm | 670 | 820 | 870 | 1070 | 1270 | 1570 |
| Paper Core I.D. | mm | 70 | 70 | 70 | 70 | 70 | 70 |
| Paper Code O.D. | mm | 96 | 95 | 96 | 95 | 96 | 95 |