| Model | FW-PS Series | |||
|---|---|---|---|---|
| Description | unit | FW-PS-50A | FW-PS-65A | FW-PS-75A |
| Raw Material | LLDPE | |||
| Film Thickness | mm | 0.008 - 0.1 | 0.008 - 0.1 | 0.01 - 0.1 |
| Film Width | mm | 200 - 750 | 600 - 1150 | 900 - 1600 |
| Extruding Output | kg/hr | 20-65 | 45-90 | 60-140 |
| Whole Power Required | kw | 40 | 50 | 70 |
| Overall Dimension | cm | 450 x 220 x 400 | 480 x 260 x 450 | 680 x 320 x 600 |
| Extruder | Low Base Type | |||
| Screw Diameter | mm | 50 | 65 | 75 |
| Screw Ratio | l/d | 30:1 | ||
| Driving V.S. Motor | hp | 30 | 50 | 75 |
| Heating Power | kw | 10 | 15 | 20 |
| Screw Speed | rpm | 0-120 | 0-110 | 0-110 |
| Cooling Blower | pcs | 3"x 2 | 3"x 3 | 3"x 4 |
| Temp. Controller | zone | 6 | 7 | 8 |
| Die | Spiral Type | |||
| Die Diameter | mm | 250 | 400 | 600 |
| Heating Power | kw | 6.1 | 7.2 | 12.6 |
| Rotating Air Ring | set | 1 | ||
| Chilled Air Device | set | 1 | ||
| Rotating Die Device | set | 1 | ||
| Take-Up Unit | Motor Type | |||
| Take-Up D.C. Motor | hp | 1 | 1 | 2 |
| Take-Up Roller Width | mm | 800 | 1200 | 1800 |
| Take-Up Height | mm | 4200 | 4500 | 6000 |
| Take-Up Speed | rpm | 10-120 | ||
| Winder | Surface Type / Two Stations | |||
| Winding Roller | mm x pc | 870 x 2 | 1270 x 2 | 1870 x 2 |
| Winder DC/ TM Motor | 1HPx 2PCS | |||
| Adhesives Auto-feeder | set | 1 | ||
| Wastage Winder | 1 Set(Torque Motor 10kg/cm) | |||