Mini Type HDPE Plastic Film Extruding Machine

Mini Series

The Cherng Horng blown film machine can produce a wide range of shrinkable films to meet the needs of customers, and the Mini Series is the most populous models in the industry.

The machine covers a small part of your plant while still guaranteeing a high yield of 65 kg per hour, which is quite high compared to the traditional small blown film machines on the market. Moreover, the cost of the machine is lower than that of a normal machine.

The final product is of high quality and the film has a maximum width of 700 mm. Cherng Horng's blown film machines are used in many industries for many years in the industry, providing the best service to end users around the world.

Blown Film Machine
Model Mini Series
Mini-45 Mini-50
Raw Material
Film Thickness mm 0.007-0.12 0.007-0.12
Film Width mm 200-550 200-700
Max. Film Output kg/hr 50 65
Whole Power Required kw 30 32
Overall Dimension cm 255 x 180 x 300 255 x 180 x 300
Net Weight kg 2000 2200
Extruder Low Base Type
Screw Diameter mm 45 50
Screw Ratio l/d 28:1 28:1
Driving A.C. Motor + Inverter hp 20 25
Heating Power kw 9 9
Screw Speed rpm 0-110 0-110
Cooling Blower Ø2 1/2" x 1 PC Ø3" x 1 PC
Temp. Controller zone 4 4
Die Spiral Type
Die Diameter mm 65+85 65+90
Heating Power kw 3 3.5
Blower hp 5 5
Air Ring set 1 1
Take-Up Unit Motor Type
Take-Up D.C. Motor hp 1 1
Take-Up Roller Width mm 600 750
Takep-Up Height mm 3000 3000
Take-Up Speed rpm 0-120 0-120
Winder Surface Type
Winding Roller pc 1 1
Torque Motor kg/cm 20 20
Winding Width(max) mm 600 810

OPTIONAL EQUIPMENTS :
AIR COMPRESSOR, SURFACE TREATER, AUTO-LOADER, ROTATING DIE DEVICE, TUBULAR-SIZE CONTROLLER, DRYER..ETC.
SPECIFICATIONS ARE SUBJECT TO CHANGE FOR IMPROVEMENT WITHOUT ADVICE.